NAD C328 Digital Stereo Amplifier

Rp79.000.000,00Price

ANALOG IN/HEADPHONE OUT

THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response

Output impedance

ANALOG IN/SUBWOOFER OUT THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response

Gain

Output impedance

ANALOG IN/SPEAKER OUT

Continuous output power into 8 ohms and 4 ohms THD (20 Hz – 20 kHz)

Signal-to-Noise Ratio

Gain

Clipping power

IHF dynamic power

Peak output current Damping factor Frequency response Channel separation

Input sensitivity (for 40 W in 8 ohms) Standby power

PHONO IN/SPEAKER OUT

THD (20 Hz – 20 kHz) Signal-to-Noise Ratio

<0.005 % at 1 V out

>100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain) ±0.3 dB (20 Hz - 20 kHz)

11 ohms

<0.005%at1Vout

>100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain) ±0.2dB(20Hz-20kHz)

17 dB

200 ohms

50W (ref. 20 Hz-20 kHz at rated THD, both channels driven) <0.03%(100mWto40W,8ohmsand4ohms)

>95 dB (A-weighted, 500 mV input, ref. 1 W out 8 ohms)

37 dB

>50W(at1kHz 0.1 % THD) 2 ohm 210w

4 ohm 150w

8 ohm 80w

>18A (in 1 ohm, 1 ms) >100(20Hz-20 kHz) ±0.3dB(20Hz- 20 kHz) >85 dB (1 kHz)

>70 dB (10 kHz) 250 mV

<0.5 W

<0.03 % (200 mW to 40 W, 8 ohms and 4 ohms)

>75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms) ±0.3 dB (20 Hz - 20 kHz)

Frequency response (RIAA deviation)

Note: The RIAA response is consistent with a pre-emphasis that is rolled off at 50kHz by a second order filter, such as used in Neumann cutting lathes.

Channel separation

Input sensitivity (for 40 W in 8 ohms)

DIGITAL IN/SPEAKER OUT

THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response Gain

Channel separation

 

>80 dB (1 kHz, 8 ohms, 50 mV input, 13W out) >60 dB (10 kHz, 8 ohms, 50 mV input, 13W out) 3.6 mV

<0.03%(100mWto40W,8ohmsand4ohms)

>95 dB (A-weighted, -12 dBFS input, ref. 1W out in 8 ohms) ±0.3dB(20Hz-20kHz)

47 dB (Vrms/FS)

>80 dB (1 kHz)

>70 dB (10 kHz)

Gross dimensions (W x H x D) 435 x 70 x 285 mm